For the proper fitting of most structures, many experts advise you on using channel nuts. Needless to say, this is the best way to secure your fitting in easy ways. Well, experts know how to use it properly and they get best results as well with it. But if you don’t know how to use it, then you may not get optimum results. For your help here I am sharing some tips that can help you in this regard without any issue.
Insert them properly:
In order to tighten the structure with the nuts, first you need to insert them properly into the screw or bolt. You should try to insert it at a 90-degree angle that will help you roll it easily. Also, it will be easy for you to Gove on the threads and you would be able to get much better protection with it. If you fail to do it properly at once, you can take it and you can try to fix it again.
Twist it properly:
This is very much important to get the best results with it. When you rotate the nut, then make sure you rotate it till it is completely tight. If you will keep it loose then it may fall down after some time and that will reduce the strength of your structure. Ideally, you should take a wrench and you should tighten it as much possible.
Lock it properly:
This is the third but very important step that you must do to secure your channel nuts. If you will not secure it properly, then it may fall down and that will directly risk the security or strength of the structure. Most of these nuts come with a locking option and that locking is quite easy as well, so you should not find any trouble doing this thing.